Black Friday rarely brings serious discounts on analog polysynths, but this year one of the most interesting small instruments for expressive players has dropped in price. Sequential's Fourm, a compact four-voice analog with a polyphonic aftertouch keybed, is currently listed at €639 at Thomann, according to Synth Anatomy. The reported regular price is €949.99 / £799.99, and the deal is described as valid until 30 November 2026.

Fourm is not a new release. It was announced in September 2025. But at this price it becomes one of the most affordable ways to get genuine per-note pressure on a hardware analog synth, and that makes it worth a closer look for anyone exploring expressive playing.

What Fourm is

Sequential positions Fourm as a spiritual successor to the Pro-One and a "budget Prophet". The architecture is classic subtractive, built on modern analog chips:

The panel follows the Pro-One idea of a compact modulation matrix with dedicated knobs and buttons, so routings are visible and quick to change.

The keybed: polyphonic aftertouch, not MPE

The feature that matters most for this audience is the three-octave Tactive slim-key keybed with polyphonic aftertouch. Every key sends its own pressure value, so you can lean into one note of a chord without affecting the others.

On Fourm, poly aftertouch can be routed to up to three destinations at once: oscillator A or B frequency, filter or amplitude, and LFO frequency or amount. Pushing harder on a single note can therefore open the filter, add vibrato and raise the level of that voice only. With four voices, that is enough to make chord swells and moving inner voices feel alive.

It is important to be precise here. Polyphonic aftertouch is one dimension of per-note control. MPE adds per-note pitch bend and a per-note timbre axis (usually CC74) on top of pressure. Sequential has not announced MPE support for Fourm, and our sources do not mention it. We explain the trade-offs in Poly Aftertouch vs MPE: Why New Synths Ship Without It.

Using Fourm in an MPE setup

Even without MPE, Fourm can live happily in an expressive studio:

  1. As a poly AT controller. Fourm has USB-C and 5-pin MIDI, so it can also play software. Check the Fourm manual to confirm which aftertouch data the keybed transmits. Many MPE-capable plugins also respond to polyphonic aftertouch, and some DAWs record it better than others.
  2. As a sound module. Fourm receives MIDI on its 5-pin MIDI In. An MPE controller set to a single channel can drive it, but you will lose per-note pitch and timbre. Map your controller's pressure to channel or polyphonic aftertouch, depending on what your controller can send.
  3. Alongside an MPE surface. A popular approach is to use a dedicated MPE controller such as a LinnStrument or Osmose for software instruments, and to keep Fourm for analog parts where poly AT is enough.

Things to consider

Fourm is deliberately compact, and that brings trade-offs. The keybed is only three octaves and uses slim keys. Audio output is a single mono line out, plus a headphone output. There is no onboard effects section. Connectivity includes MIDI In, Out and Thru, a footswitch or expression pedal input, and USB-C for MIDI and firmware updates. Synth Anatomy does not mention CV or gate connections.

The deal also comes from a single retailer and is time-limited. If you want to compare it with other expressive bargains, our Black Friday 2026 MPE shopping guide covers controllers and software, and our look at Behringer's Polykeys 61 shows where low-cost poly AT controllers are heading.

The verdict

At its regular price, Fourm competes with a crowded field of four-voice analogs. At €639, the poly aftertouch keybed becomes the deciding factor. If you have been curious about per-note expression on real analog circuits, and you can live with a short keyboard and mono output, this is a rare chance to get it at a mid-range price. Just remember that it complements an MPE controller rather than replacing one.