Black Friday season has started early in the synth world, and one deal stands out for anyone interested in per-note expression on a tight budget. According to Synth Anatomy, the ESI Xsynth is currently available for €239 at Amazon.de, a 20% discount on its €299 price, for a limited time.

That's a very low entry point for a keyboard with polyphonic aftertouch. But polyphonic aftertouch and MPE are not the same thing, so let's look at what the Xsynth actually does and where it fits in an expressive setup.

What the Xsynth is

The ESI Xsynth is three devices in one ultra-slim chassis:

Connectivity is handled by USB-C (bus-powered, no separate power supply needed), 3.5 mm MIDI in and out (which can bridge USB MIDI to hardware), and 3.5 mm aux in and headphone/line out. The unit measures 387 × 148 × 27 mm and weighs 634 g, so it genuinely fits in a laptop bag.

ESI provides a free editor for Mac, Windows and iPad, and bundles Bitwig Studio 8-Track, Cubasis LE and WaveLab Cast.

Polyphonic aftertouch vs. MPE

Here's the crucial point: ESI does not list MPE support for the Xsynth. The official product page describes polyphonic aftertouch, pressure-sensitive modulation and pitch bend buttons, but no MPE mode.

So what's the difference?

The Xsynth's keys don't move sideways or detect a Y-axis position, and pitch bend is handled by global buttons. That means no per-note pitch or slide, regardless of the protocol.

Can it still be useful for MPE players?

Yes, with the right expectations. Polyphonic aftertouch delivers the dimension many players use most: per-note pressure. Holding a pad chord and swelling just the top voice, or adding vibrato depth to a single note through the mod matrix, is entirely possible.

A few practical tips:

  1. Check your plugin's input options. Some synths accept polyphonic aftertouch directly; others only respond to per-note pressure in MPE mode. Test before you rely on it.
  2. Route pressure deliberately. In the internal engine, not every preset maps aftertouch to something audible. Use the mod matrix to send it to filter cutoff, amplitude or vibrato depth.
  3. Tune the response curve. The Xsynth's shallow keys need a lighter pressure curve than a full-travel keybed. Our guide to calibrating MPE pressure and velocity curves applies here too.
  4. Use it as a second controller. For travel or sketching, it pairs well with a dedicated MPE surface back at the studio.

For a deeper look at this distinction on other instruments, see our explainers on polyphonic aftertouch keyboards that aren't MPE and poly aftertouch vs. MPE pressure.

Who should buy it at €239?

The Xsynth makes the most sense for:

If your goal is full MPE with per-note pitch bend and slide, this isn't the device. A dedicated MPE controller remains essential for that.

The bottom line

At €239, the ESI Xsynth is one of the most affordable ways to get polyphonic aftertouch in a portable, all-in-one package. Just go in clear-eyed: it's a pressure-expressive keyboard, not an MPE controller. Check the current price and availability through ESI or your preferred dealer, as Black Friday offers rarely last long.